QRZ Lookups for Logger32
by N2AMG on Jan.04, 2009, under Software & Software Support
Since the Current version of Logger32 (3.16.0) no longer supports Internet lookups via QRZ, I have written two separate applications that will allow the user to get information via QRZ.
The first application “QRZSubscriberXMLLookup.exe” uses the Pay for use XML data feed from QRZ. In order to use this feed you need to have purchased one of QRZ’s XML subscriptions. At the time of this writing that was $29.95 a year. After installation whenever the Logger32 lookup window calls for a lookup this application opens and contacts QRZ’s data feed and populates the L32 lookup window with information recieved.
Follow the setup directions included in the zip file.
Current Version: 1.4.1
Full Download:QRZSubscriberXMLLookup.zip Updated 11/05/09 v1.4.1
The second application “QRZHTTPLookup.exe” uses a web browser to display the QRZ website. After the Browser window is opened by L32 the data is taken from the lookup page and populates the Logger32 lookup window. This way it does not bypass QRZ because the web page is still displayed before the information populates L32.
Current Version: 1.4.5
Update Download:QRZHTTPLookup.zip Updated June 06 2010 v1.4.5
If your system complains about missing files, Download this full install zip and it will install all dependant files on your system.Just copy the “QRZHTTPLookup.exe file to your L32 directory after installed.
Full Install Download:QRZHTTPLookupFullInstall.zip Updated June 06 2010 v1.4.5
Any Questions or problems encountered you can email me direct or post a message here or the Logger32 yahoo group. I will get back with you as soon as I can…
73 Rick N2AMG
Leave a Reply
-
Howdy. Welcome to N2AMG's Place!
Thanks for dropping by! Feel free to join the discussion by leaving comments, and stay updated by subscribing to the RSS feed. See ya around!
-
I don't charge for any of my software, but users have asked me if there was a way to donate money.
Email Newsletter
January 5th, 2009 on 3:11 am
Dear OM
I try the QRZHTTPLookup and when I am trying to get the info from the file I am geting the responce “Component”MSINET.OCX”or one of its dependencies not correctly registered:a fille is missing or invalid.
Any sugestion???
Best 73
DE
SV1VS
January 5th, 2009 on 5:07 am
Hi Rick, tnx for this. I’m not going to subscribe so I installed the QRZHTTPlookup and it seems to be working just fine. In fact I like to see the QRZ webpage as it contains a lot of info abt the station I’m working. The ads are not such a problem.
73 de ZS6WN
Karel
Polokwane, RSA
January 5th, 2009 on 8:50 am
Nick..
I will build a full installer build and this will install all the dependant files that are needed. I’m not understanding why the .ocx is missing from certain systems but Hold on for a little bit and I will have it built..
January 5th, 2009 on 11:50 am
Hi Rick again,
THANK YOU for the full installer.Problem now is solved .
Thank you again
Best 73
DE
SV1VS
January 5th, 2009 on 2:58 pm
[...] Sveiki pasirode naujausias Logger32 atnaujinimas. Problema ta, kad nebepalaikoma QRZ.COM paieska del kai kuriu politiniu/komerciniu aplinkybiu. Yra sukurtas isorinis modulis, kuris tai kompensuoja (nebebus taip gerai, kaip buvo, bet geriau taip, negu niekaip) Programa yra cia: http://www.n2amg.com/software/qrz-lookups-for-logger32/ [...]
January 5th, 2009 on 3:01 pm
Your gonna have to make that in english as I’m not sure what you are asking…
January 9th, 2009 on 10:17 pm
I loaded the lookup.zip and I did need to also load the FullInstall to satisify the missing file message.
Works great,,,,thanks and 73’s
Bill KH6OO
January 12th, 2009 on 9:51 am
Dear OM N2AMG,
many thanks for your good job. The full version is ok at my home.
Again thanks a lot.
88’s
Patricia – F8BJP
January 13th, 2009 on 5:42 pm
Glad it’s working for you……
73 Rick
January 16th, 2009 on 5:00 pm
Hi Rick,
many thanks for the QRZHTTPlookup its working just fine.
I wish you good dx, keep the good work.
73
January 22nd, 2009 on 11:18 pm
THANK YOU SO VERY MUCH for making the plug ins for the call sign lookup. Very neat to be able to resume the feature that I so appreciated about logger 32. Wishing yu and yours the very best,
Chuck, W7CAI
January 26th, 2009 on 1:14 pm
Excellent tool! Thanks a lot for it. Keep on the good work.
73
January 29th, 2009 on 1:39 pm
The Logger32 QRZ XML Lookup has been updated. You can download it from the link above. This includes some bug fixes and now displays an error message if QRZ returns an Error message.
January 31st, 2009 on 3:45 pm
Many thanks,Logger as it should be.
Great work
Regards Dave
January 31st, 2009 on 4:00 pm
Thanks for the lookup utility, Rick. The http program installed quickly and worked the first time. Tnx, Clark/ke4rq
February 1st, 2009 on 4:24 pm
Another Update to the XML Lookup. This corrects another bug.. You will need to delete your QRZXMLLOOKUP.ini fle and let it recreate it again and enter your Username and Password..
February 9th, 2009 on 11:07 am
Using QRZHYYPLookup .Since today error on loopup but
info is displayed.
First error window say’s : There is an update available
Second window say’s : Form_load invalid prodedure call
or agrument
73
February 9th, 2009 on 11:09 am
Sorry ,previous msg ,correction : QRZHTTPLookup
February 9th, 2009 on 4:09 pm
Hi there,
QRZHTTPLookup.exe is great. I would like to suggest you to store windows and scroll positions.
73,
Felipe – PY1NB
February 9th, 2009 on 6:34 pm
Roland..
Goto the link above and redownload the QRZHTTPLookup.zip file. This will correct your problems. I made the mistake of releasing 2 updates using the same version number and users hadn’t downloaded the correct update.
Felipe..
The window position and size state(closed or open) are saveed currently. I can’t save the scroll position as then that would avoid you looking at the ads. and that would violate the lookup terms..
73 Rick N2AMG
February 10th, 2009 on 8:42 am
Hi, Rick,
Thanks for giving us the “missing links” from Logger32 to QRZ.com. I am using the Subscriber version. When I first loaded it I got the missing OCX message … quickly fixed by a Google search. However, I have to delete the .INI file containing the signon, password (encrypted) and the remaining data in order to use the lookup feature on a following day. The last line of the .INI file contains a rigid time out that I can’t change to a future date/time. Have you come up with a fix for this? If so, point me to it, please.
73,
Buzz, WB3FXW
February 10th, 2009 on 1:38 pm
ref : error windows since 9 febr
Hi Rick
Yes,I had updated the QRZHTTPLookup file but the result was the same .Now I did it again and it works !
Tnx very much for the help and the nice tool you made.
73
Roland ON6HH
February 10th, 2009 on 5:21 pm
Hello Rick,
When installing, I keep getting this error-
An error occurred while registering the file C:\Windows\System32\msxml2.dll
Any ideas what I should do?
Mike
February 10th, 2009 on 6:24 pm
Mike..
What version of the lookup are you using?? the XML or the HTTP??
If it’s the XML will need to make a full install for it as it sounds like the dll is not registering correctly from the application.
Also I have added all of the current updates to the links above. These should correct all the misc errors that have cropped up..
73 Rick N2AMG
February 11th, 2009 on 7:56 am
Oh, sorry about that, it’s the HTTP version. I also did a complete re-install last night just before I posted it worked right after I posted and I was about to announce this when it quit working again??!!?? It seems to be a sporadic problem. I think I am going to turn off my anti virus and a few other things one at a time to see if I can isolate what it is.
Thanks Rick,
Mike
February 11th, 2009 on 4:08 pm
Thanks a bunch for such a great tool for L32, installed your HTTP lookup tool and it is working flawlessly!
Appreciate it very much!
73,
Tony – K1AJD
February 14th, 2009 on 7:11 am
Not sure why exactly Rick but it is now working. I wonder if possibly there was a service or application running at the time causing the error. No matter, like I say it’s working which is the main thing. Thanks.
‘73
Mike
February 22nd, 2009 on 10:10 am
Many thanks for the great tool and it’s working very well with Logger 32 on windows vista, keep up the great work you are doing. God blessings, Good health, strength and prosperity to you and your family.
73
Steve
9Z4DZ
February 26th, 2009 on 1:54 pm
Dear Rick, first of all, thanks a lot for your efforts and this great working XML lookup. It’s really fast and delivers info within seconds. Meaning it WAS fast. I had a couple of changes here and XML does not lookup anymore (HTTP lookup still works). First I have a new DSL line (1Mbps) together with a new linksys modem/router/wireless/firewall etc and I did install the update of your software (now 1.2.0.5). One of the above is a roadblock to QRZ.com.
Quick question: which port is your program using, I might need to open it.
Did the updated software create problems with someone else?
Anyway, great job Rick and thanks again
73, Harry, 7Z1HL
February 27th, 2009 on 10:33 am
Harry..
You do have the latest version of the gateway. It uses the same port as web lookups so if you can view web sites you should be able to get info from QRZ. One thing you can try is to delete the QRZXMLLookup.ini file and let the app recreate it the next time L32 loads it. It will ask you for your password and user name again I am thinking that maybe something is messed up there.. If that does not work i will send you a doctored version tha will output all returned info from the lookup to a text file so I can see what is happening..
73 Rick N2AMG
February 28th, 2009 on 11:46 pm
Hey Rick, thanks for your response.
I downloaded the XMLLookup file again and also deleted the ini-file. Still doesn’t work. I noticed that the lookup reacts as if I entered the wrong QRZ-password. I made sure by logging on to QRZ.com that user name and password are working. Then I deliberately entered the wrong one in XMLLookup and it reacted as before, just doing nothing. Any ideas or clues?
73, Harry, 7Z1HL
March 8th, 2009 on 1:26 pm
Hello Rick,
after reading some comments, I decided to install the Full Install version. It works great, just like before.
many thanks.
73’s de Jan, PE0MVJ.
March 13th, 2009 on 11:01 pm
Hey Rick,
thanks so much for your offline help. The XML-lookup is working great now and is an excellent compliment to the rich information in QRZ.com. Both together make up a valuable tool to obtain immediate background info on the ham I am currently working on the radio.
Many thanks again
73 de Harry, 7Z1HL
March 15th, 2009 on 10:17 pm
Harry..
I’m just glad that everything got figured out..
Let me know if there is any other issues you find..
73 Rick N2AMG
March 15th, 2009 on 10:19 pm
I have just uploaded a new version of the QRZ XML Lookup the new version is 1.3.0 This version changes the QRZ address used to access the XML server as they have changed to a new one and also removes WinInet.dll from the project as it was causing some issues…
73 Rick N2AMG
March 17th, 2009 on 11:53 am
Hey Rick,
everything is just working fine, thanks a lot. But you asked for another issue, here is one:
Sometimes people write whole stories into the fields for NAME or QSL_VIA and when I try to save the record, respectively QSO, Logger does not accept the amount of text in that field.
Suggestion: Is it possible to truncate the text sent to Logger to the maximum length of the corresponding field in Logger?
Would save some hustle and add comfort…
73, Harry, 7Z1HL
March 27th, 2009 on 7:28 am
Hi Rick,
I’ve noticed today that the NON subscriber version of your callsign lookup now puts the GigaParts advert right in the centre of my panel. This means I have to either resize the panel (takes up too much space or I have to scroll across the panel in order to see the station detail).
Is there a way you can fix this or is it yet another mechanism for screwing money out of us!!
Regards
David – G4PNX
March 27th, 2009 on 8:08 am
No thats a HTML error on QRZ’s part.. I imagine they will fix it sometime today..
73 Rick
March 28th, 2009 on 4:03 am
Thanks Rick…everything back to normal now.
73 David G4PNX
May 7th, 2009 on 10:15 am
Working fine Rick, many thanks !
Keep on the good job…
May 7th, 2009 on 7:04 pm
Oups ! Said it too early… Have now message : “error loading Global sections of C/Program Files/Logger32/Logger32.ini/Some features/funtions of the program may not function correctly” at the start of Logger 32 and doesn’t open anymore !
I had to make a backup of my computer, to delete L32 and redownload it completely; I redownloaded your files (httplookup) as the same I did but nothing to do, L32 doesn’t start anymore with the files included… Any idea ??
Thanks in advance…
May 7th, 2009 on 7:18 pm
Actually I do not have a clue on that one.. That is one that you will need to post to the Logger32 group and see what they say…
Sorry….
May 8th, 2009 on 5:45 am
ok… thanks, will see this way.
Chris F8DZY.
May 8th, 2009 on 11:40 pm
Hey Rick,
I haven’t written for a while, just enjoying the QRZ-XML-lookups coming up in a second or two. Great job, Rick.
Quick question, how do I know what is all copied into Logger upon XML-lookup? Or put the other way, can I also have the grid locator copied into logger? In Logger it says “Transfer all fields on lookup”, but the grid is not copied. Is this now a question for the Logger-group?
73, Harry, 7Z1HL
May 9th, 2009 on 5:41 am
Hi Harry..
In order for the grid to be passed to L32 you need to have one of the entry window boxes in L32 setup for the grid. Once you have that setup then the grid will be passed each time. If I remember right this is the only field from the lookup that needs to be done this way…
73 Rick
May 9th, 2009 on 10:59 pm
Thanks a lot Rick, I just tried it out and it works like a charm. 73, Harry, 7Z1HL
July 1st, 2009 on 9:43 am
New Files have been uploaded to the web site tht function with version 3.19 of Logger32
73 Rick N2AMG
July 2nd, 2009 on 8:44 am
Hello Rick,
how can i use Firefox instead of the Internet Explorer
73
Guenter
DL5FCW
July 12th, 2009 on 7:31 am
Guenter..
There is no way to use firfox for the lookup’s. The control I use in the software is based on IE and there is no way for the conrol to function with Firefox.
Rick N2AMG
August 22nd, 2009 on 6:59 pm
As of sunday 8/22/09 the QRZ HTTP Lookup no longer functions. QRZ has made changes to the way callsigns are looked up and does not provide a means for an outside application to make the same connection that was able to be done previously. I have tried for the past hour to come up with a work around for it but I have not been able to do so….
As of now the only way to do a lookup is to use the XML Lookup which requires a subscription.
73 Rick N2AMG
August 22nd, 2009 on 7:28 pm
I was able to create a work around for the HTTP Lookup. I’m not sure how long it will last but for now it is working. You can get it by clicking the links above…
73 Rick n2AMG
August 22nd, 2009 on 8:19 pm
Logger32 QRZ lookups were working just fine, but now it will only pull up QRZ’s homepage and no call information. I didn’t change anything. The program just started behaving this way. I logged off and tried it again and the same thing happens. Any suggestions?
Pete K1OYQ
September 1st, 2009 on 7:10 pm
I guess I am not the only one having problems with the HTTP lookups as of today. When I use the lookup it only transfers the grid and url info, but no name and address info. I am assuming that you are still trying to come up with a fix. Good luck and thanks for the previous programs.
September 2nd, 2009 on 2:02 pm
rick
i’m using qrz subscriber lookup
everything I okay
name and address have not been filled in
url and call is ok , what is the problem
sorry for my englisch
73 kurt on8mt
September 2nd, 2009 on 6:39 pm
I have updated the HTTP lookup to handle changes made at QRZ.com. Hopefully they will hold off on any other changes for a while..
73 Rick N2AMG
September 2nd, 2009 on 8:23 pm
Hi,
I’m qrz subscriber, when I use the QrzSubscriberXMLlookup, it works but i have another lookup window which opens http://www.ssa.se.
Also my windows jobs bar shows an “InternetCallsignLookup” job.
I guess this is not normal but I can’t correct it.
Any solution ?
73 michel ON4KDE
September 2nd, 2009 on 10:04 pm
Thank you very for you update ( QRZHTTPLookup.exe ) very good job.
Best 73’s Rick
Joe… ve2pz
September 2nd, 2009 on 11:17 pm
When clicking on the Lookup Window the latest Version does not insert State or Grid Square or QTH in to Logbook Entry Window. It does correctly insert Name. Maybe this is a new LOGGER32 problem.
September 5th, 2009 on 12:13 pm
Rick, you are the best!! Thanks for the updated file for the HTTP lookup. It works great!!
September 5th, 2009 on 1:45 pm
The full program version of your HTTPLookup worked like a charm! Looking forward to reading your news letters. Thanks and 73’s!! Jim – KC8YGH
September 5th, 2009 on 3:51 pm
QRZ started to play up again so checked for updates. Loaded and working first time many thanks Rick.
Cheers Beers & 73
Chris
September 10th, 2009 on 1:00 pm
Hello Rick !
The QRZHTTPLookup is my Logger32 version: 3.21 OK!!!
Many thanks : ha7lj Pisti
September 12th, 2009 on 12:01 pm
Paid my 29 dollars and followed the instructions to link logger32 with QRZ.
Everything seemed to go ok, gave my user-name and qrz password when asked.
But now when i click on a callsign all that happens is a lookup icon on the bottom of the page.
No qrz or no info
Where have i gone wrong
September 20th, 2009 on 7:44 pm
Didn’t work for me at all. I first tried just replacing httplookup then I tried the httplookup full install. Attempting to do a lookup shows the results in the internet window but the httplookup window shows “click for more detail” in the name field and the start of xml output in the address field. any ideas?
October 22nd, 2009 on 7:45 am
hi , i am having trouble getting the look up to work , i am using an older version of looger32 3.15 , as i tried to load the new version 3.22 on my netbook but it wont work . Do i need to use a new version of logger32 ???
October 22nd, 2009 on 9:33 am
Tony..
You need at least version 3.16 of Logger32 in order to use the Lookup’s. I would upgrade to the latest version as there have been quite a few bug fixes since 3.15.
When you say it won’t work on your netbook what happens???
73 Rick
November 3rd, 2009 on 11:53 am
Hi Rick , i downloaded the latest version of logger32 , and when i tried unzip it on my netbook it was looking for a tempory file , So i reinstalled my old version which works ok but will not run the lookup . will let you know how i get on tnx 73’s de ei3ha .
November 5th, 2009 on 8:45 am
Hi there, I now have finally got the qrz look up running ok. but everytim i open logger i get a message saying that DISTANCE in adif file is not found. Could you point me in the right direction please. Toby.
December 15th, 2009 on 4:30 pm
The QRZ.com HTML lookup works and I like it.
But I have one question. My rig PC isn’t internet connected at present so I expect to manually transfer data from the rig PC to my regular PC from time to time. Therefore, I’d like to initiate the QRZ HTML query not while entering the callsign initially, but later after it is already in the logbook page. I don’t see any way to do this. The HTML query is only invoked when entering a callsign in the log entry pane, isn’t that right? Logger32 documentation shows a CTRL-Q option to invoke callsign lookup, but that option does not appear in my Logger32 installation.
Thank you for this very useful software module. Much appreciated.
73 de K6MEE
January 3rd, 2010 on 3:42 pm
I installed “QRZHTTPLookup.exe”. When the Browser window opens only the ops name is populated to the Logger32 data entry window. There used to be a dropdown box to select the data that got passed to the data entry window. I don’t see one. Thanks for a wonderful program! 73
January 19th, 2010 on 12:55 am
Hi Rick
just change the os from xp to w7 and QRZHTTPLookup not working (have install full version).
Any advice?
Thank you
73 John
February 20th, 2010 on 5:25 pm
I have installed Logger 32 version .24
But I can not access to QRZ.com
Supose one of the files is not running good or need to be updated. The problem is I do not know how to update it.
Is there anyone who can help me ?
Manu thanks in advance.
Antonio Gamito
CT1CZT
March 9th, 2010 on 8:01 pm
My QRZHTTP lookup has stopped working properly…it won’t populate the Logger32 Lookup box…I did a full reinstall but it still wouldn’t work properly…using Vista Home here…..any ideas? Dave
March 30th, 2010 on 4:51 pm
When trying to run setup.exe it gives message, invalid command line. Am I doing something wrong?
April 20th, 2010 on 9:52 pm
John..
Did you ever get this resolved????
Rick N2AMG
May 9th, 2010 on 3:27 am
Hi.
Thanks alot for this nice feature.
Keep up the good work.
73’s de SA6ANH
May 9th, 2010 on 3:28 am
By the way i am running Win7 64 bit, and the software working flawlessly.
73´s de SA6ANH
June 1st, 2010 on 4:15 pm
The lookup stopped working yesterday. There are 2 problems. First you get a “Script Error”. Second the Grid square no longer shows up.
Thanks
- Paul
June 2nd, 2010 on 2:31 am
The lookup stopped working yesterday. There are 2 problems. First you get a “Script Error”. Second the Grid square no longer shows up.
Thanks Tony IZ6CLZ
June 2nd, 2010 on 6:54 am
Changes made to the QRZ website have caused this. at the current time there is no way for me to code around any of the changes they have made. This is their way of driving users to the XMl Data feed that is still functioning fine. Until they undo what they have done the HTML Lookup will not functin correctly and there is no way for me to fix it at the moment the way they have made their site….
73 Rick N2AMG
June 3rd, 2010 on 6:39 am
Hi Rick
Thank You very much for fixing it again !
Great work !
73 Roland,ON6HH