Comments on: MixW2 DXLabs Gateway

By: David K5RAV

David K5RAV — Sat, 24 Dec 2011 05:10:22 +0000

I am using DXLabs 3.1.1, DXKeeper 7.1.9 and MixW3.0.1 with an XP computer. All works with the exception that information is not transfer to the “tx band” and “tx freq” spaces in DXKeeper 7.1.9.

I suspect that I have not properly setup the program. Any suggestions? Thanks de David

By: Rene CM2RVA

Rene CM2RVA — Sun, 06 Nov 2011 19:14:08 +0000

Muy buen software el Logger 32 y todos sus utilidades , llevo tiempo utizandolo solamente como Libro de Guardia y muy Bueno espero utilizarlo en los Concursos pero no e sabido utilizarlo , si alquien me ayuda se lo agradecere . Buen Software y Poderoso en utilidades e informacion para el usuario Chao
Rene/CM2RVA

By: Rene CM2RVA

Rene CM2RVA — Sun, 06 Nov 2011 19:13:47 +0000

Muy buen software el Logger 32 y todos sus utilidades , llevo tiempo utizandolo solamente como Libro de Guardia y muy Bueno espero utilizarlo en los Concursos pero no e sabido utilizarlo , si alquien me ayuda se lo agradecere . Buen Software y Poderoso en eutilidades e informacion para el usuario Chao
Rene/CM2RVA

By: John Frazier

John Frazier — Sat, 26 Mar 2011 21:57:46 +0000

Hi Agn Ray, Just wanted to add that Mix shows proper carrier freq when connected to the FT990 directly.ie without DxLab running tnx agn, John W1OOO

By: John Frazier

John Frazier — Sat, 26 Mar 2011 21:53:36 +0000

Hi Ray, I have Mix2DXLabs working with Commander and Spotcollector and yaesu FT990. Frequency is ok in commander but mix2 shows carrier plus audio which does not update unless commander freq is changed. How can i show carrier freq on mix2 and in spotcollector? Thanks for any help. John W1OOO

By: Ray

Ray — Wed, 10 Nov 2010 17:34:25 +0000

The 3.10v of the mixw2dxlabs bridge didn’t include an option to interconnect with SpotCollector as advertized. What did I do wrong, or is there another download for SpotCollector?

Thanks ———– Ray KE3G

By: Terry Mills

Terry Mills — Tue, 09 Nov 2010 01:12:37 +0000

Well, I finally got mixw2DXLabs to load. Seems to get all the information in the xfer box, but when I try to save the contact, it does NOT xfer the band or freq. I’m sure I have something set wrong, but for the life of me I can’t figure out what. What setting am I missing. HELP!!!!

Terry
KC3AK

By: Craig

Craig — Thu, 30 Sep 2010 22:44:51 +0000

Maybe I am not understanding the program to well, but the program seems to not read the QRG like 14071.3 etc. It only shows the RIG QRG not the actually carrier frequeny, also is there a way the info that is sent to DXkeeper that can be automatically saved in DxKeeper? I also notice the Meter Band selection is blank in DXkeeper.

By: Bob Sheskin

Bob Sheskin — Tue, 21 Sep 2010 22:59:58 +0000

I decided to look at mixw again and tryed the gateway. No matter where I put the exe it says mixw not running and closes. I have mixw 2.2 and the latest gateway. Mixw isinstalled in c:\mixw, tried the gateway there and the app\roaming under my name with no joy.

By: Buddy

Buddy — Mon, 06 Sep 2010 14:18:49 +0000

Rick,
I installed Mix2DXLabs program and it works great with DXKeeper, thanks for the program! One question: The OPERATING frequency is always blank, does the program calculate this freq when the QSO is saved? The rig frequency and audio offset are the same regardless of which frequency is selected in the SETUP tab.
Thanks!